Supermicro C9Z490-PG - Motherboard Features

15
Chapter 1: Introduction
Motherboard Features
CPU
• Supports a single 10th Gen Intel Core i9/i7/i5/i3, Pentium, and Celeron series processor with up to 10 cores and a thermal
design power (TDP) of up to 125W
Memory
• Supports up to 128 of Unbu󰀨ered non-ECC UDIMM (288-pin) memory with speeds of up to 2933 MHz in four memory slots.
DIMM Size
• Up to 128GB at 1.2V
Note 1: Memory capacity and frequency is CPU dependent.
Note 2: For the latest CPU/memory updates, please refer to our website at http://www.supermicro.com/products/
motherboard.
Chipset
• Intel PCH Z490
Expansion Slots
• One (1) PCI-E 3.0 x1 Slot (PCH SLOT4)
• Two (2) PCI-E 3.0 x8/x16 Slots (CPU SLOT1, CPU SLOT5: Supports Auto Switch)
• One (1) PCI-E 3.0 x16 Slot (CPU Slot 3, CPU Slot 7)
• Two (2) M.2 PCI-E 3.0 x4 Sockets (Support M Key 2260, 2280, and 22110)
Network
• Intel Ethernet i219-V
• Aquantia Ethernet AQC107
I/O Devices
• Serial (COM) Port • One (1) front accessible serial port header (COM1)
• SATA 3.0 • Four (4) SATA 3.0 ports at 6 Gb/s (I-SATA0~3 with RAID 0, 1, 5, 10)
• Video Port
• One (1) DisplayPort connection on the rear I/O panel
• One (1) HDMI connection on the rear I/O panel
Peripheral Devices
• Two (2) front accessible USB 2.0 headers with four (4) USB connections (USB0/1, USB2/3)
• Two (2) USB 3.2 Gen 1 ports on the rear I/O panel (USB4/5)
• Three (3) USB 3.2 Gen 2 ports on the rear I/O panel (USB6/7/8)
• One (1) USB 3.2 Gen 2x2 port on the rear I/O panel (USB9)
• One (1) front accessible USB 3.2 Gen 1 header with two (2) USB connections (USB10/11)
• One (1) front accessible USB 3.2 Gen 2 20-pin connector with one (1) USB connections (USB12)
Motherboard Features
Note: The table above is continued on the next page.