Supermicro C9Z490-PG - Page 85

Chapter 4: UEFI BIOS
85
Intersil VR Command
This feature enables Intersil VR Command to x VR C-state issues. The options are
Disabled, Send for IA/GT rails, and Send for IA/GT/SA rails.
GT
GT Domain
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz) in the GT
domain. The default is 0.
GT Voltage Mode
This feature controls the voltage mode in the GT domain. The options are Adaptive
and Override.
GT Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied while GT is operat-
ing in turbo mode. The default is 0.
GT Voltage O󰀨set
Enter a value for the o󰀨set voltage (in mV) that will be applied to the GT domain. The
default is 0.
O󰀨set Prex
Use this feature to set the prex value as a positive (+) or a negative (-). The options
are “+” and “-”.
GT Unslice Domain
GT OverClocking Frequency
Enter a value for the overclocked RP0 frequency (in multiples of 50 MHz) in the GT
Unslice domain. The default is 0.
GT Voltage Mode
This feature controls the voltage mode in the GT Unslice domain. The options are
Adaptive and Override.
GT Extra Turbo Voltage
Enter a value for the extra turbo voltage (in mV) that will be applied while GT is operat-
ing in turbo mode. The default is 0.