H11SSL Motherboard Series Motherboard User's Manual
100
Putty KeyPad
This feature selects the settings for Function Keys and KeyPad used for Putty, which
is a terminal emulator designed for the Windows OS. The options are VT100, LINUX,
XTERMR6, SC0, ESCN, and VT400.
Legacy Console Redirection
Legacy Console Redirection Settings
Redirection COM Port
For this setting, select a COM port to display redirection of Legacy OS and Legacy OPROM
messages. Options include COM1 and SOL.
Resolution
For Legacy OS systems, use this setting to specify the number of Rows and Columns
supported for redirection. Options include 80x24 and 80x25.
Redirect After Post
For this setting, when the Bootloader is selected, then the Legacy Console Redirection is
disabled before booting to the legacy OS. If you select Always Enable, then the Legacy
Console Redirection is enabled for legacy OS systems. Default option for this system is
Always Enable.
Serial Port for Out-of-Band Management /
Windows Emergency Management Services (EMS)
Console Redirection
Select Enabled to enable EMS console redirection support for a serial port specied by the
user. The options are Enabled and Disabled.
*If the item above set to Enabled, the following items will become available for user's
conguration:
Console Redirection Settings
Out-of-Band Mgmt Port
The feature selects a serial port in a client server to be used by the Microsoft Windows
Emergency Management Services (EMS) to communicate with a remote host server. The
options are COM1, COM2 (Disabled), and AMT SOL.
Terminal Type
Use this feature to select the target terminal emulation type for Console Redirection.
Select VT100 to use the ASCII character set. Select VT100+ to add color and function
key support. Select ANSI to use the extended ASCII character set. Select VT-UTF8 to use
To Next Page
Loading...
Need help?
General
