Chapter 5: UEFI BIOS (for EPYC 7002 Series)
93
Warning: Take caution when changing the Advanced settings. An incorrect value, a very high DRAM frequency, or an incorrect
DRAM timing setting may make the system unstable. When this occurs, revert to the default to the manufacture default settings.
5.3 Advanced
Use the arrow keys to select a top item and press <Enter> to access the submenu items.
Boot Feature
Quiet Boot
Use this feature to select the screen display between the POST messages and the OEM logo
upon bootup. Select Disabled to display the POST messages. Select Enabled to display the
OEM logo instead of the normal POST messages. The options are Enabled and Disabled.
Option ROM Messages
Use this feature to set the display mode for the Option ROM. Select Keep Current to display
the current AddOn ROM setting. Select Force BIOS to use the Option ROM display set by
the system BIOS. The options are Force BIOS and Keep Current.
To Next Page
Loading...
Need help?
General
