Chapter 5: UEFI BIOS (for EPYC 7002 Series)
121
5.8 Save & Exit
Select the Save & Exit tab to enter the Save & Exit BIOS Setup screen.
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the
system conguration, and reboot the computer. Select Discard Changes and Exit from the
Exit menu and press <Enter>.
Save Changes and Reset
Select this option to reset the system after saving the changes.
Save Changes
After completing the system conguration changes, select this option to save the changes
you have made. This will not reset (reboot) the system.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
utility Program.
To Next Page
Loading...
Need help?
General
