Supermicro H11SSL-I/C/NC - Network Configuration

H11SSL Motherboard Series Motherboard User's Manual
108
Network Conguration
(Available when EFI is selected in LAN OPROM after reboot, page 71)
VLAN Conguration (LAN1 and LAN2)
Enter Conguration Menu
Create New VLAN
VLAN ID
This option is an input eld used to enter a unique numeric VLAN ID. The valid range is
from 0~4096.
Priority
This option is an input eld used to enter a unique numeric VLAN 802.1Q priority. The
valid range is from 0~7.
Add VLAN
Click this option to create the new VLAN.
Conguration VLAN List
Remove VLAN
Click this option to remove an existing VLAN.
IPv4 Network Conguration
Congure
Select Enabled to activate !Pv4 network conguration. The options are Enabled and Disabled.
*If the item above is set to Enabled, the following item will become available for
conguration:
Enable DHCP
This feature allows the user to select the source of the IP address for this computer. If
Disabled is selected, you will need to know the local IP address of this computer and enter it
to the system manually in the eld. If Enabled is selected, the system will search for a DHCP
(Dynamic Host Conguration Protocol) server in the network that it is attached to and request
the next available IP address for this computer. The options are Enabled and Disabled.
*If the item above is set to Disabled, the following items will become available for
conguration: