EasyManuals Logo

Supermicro H11SSL-I/C/NC User Manual

Supermicro H11SSL-I/C/NC
130 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #107 background imageLoading...
Page #107 background image
Chapter 5: UEFI BIOS (for EPYC 7002 Series)
107
SATA Conguration
SATA Enable
This item enables or disables the onboard SATA controller supported by the Intel PCH chip.
The options are Enabled and Disabled.
SATA Hotplug
This item enables or disables the
onboard SATA controller's hot plug feature (PCH). The options are Enabled and Disabled.
SATA Information
This item displays information on the detected SATA devices connected and are detected.
HTTP Boot Conguration
HTTP Boot One Time
When the HTTP boot option is created, this option when enabled, will allow the system to
boot via HTTP the rst time and revert to the default boot after. The options are Enabled
and Disabled.
Input Description
This option is an input eld that, when the HTTP boot option is created, can be used to enter
text to describe or identify the HTTP connection.
Boot URI
This option is an input eld used to enter a web or network address to point to the HTTP
boot les. This supports the HTTP or HTTPS protocols only.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Supermicro H11SSL-I/C/NC and is the answer not in the manual?

Supermicro H11SSL-I/C/NC Specifications

General IconGeneral
BrandSupermicro
ModelH11SSL-I/C/NC
CategoryMotherboard
LanguageEnglish

Related product manuals