18
H11SSL Motherboard Series User's Manual
1.2 Processor and Chipset Overview
The H11SSL Motherboard Series motherboard oers maximum I/O expandability, energy
eciency, and data reliability in a 14-nm process architecture, and is optimized for high
performance computing, NVMe storage solutions, and ideal for High Density Data Center
applications.
The H11SSL Motherboard Series supports the new microarchitecture 14 nm process
technology, which drastically increases system performance for a multitude of server
applications.
The EPYC 7001/7002 supports the following features:
• ACPI Power Management Logic Support Rev. 6.1
• Adaptive Thermal Management/Monitoring
• PCI-E 3.0, SATA 3.0 w/transfer rates of up to 6 Gb/s
• System Management Bus (SMBus) Specication Version 2.0
1.3 Special Features
This section describes the health monitoring features of the H11SSL Motherboard Series.
The motherboard has an onboard System Hardware Monitor chip that supports system health
monitoring.
Recovery from AC Power Loss
The Basic I/O System (BIOS) provides a setting that determines how the system will respond
when AC power is lost and then restored to the system. You can choose for the system to
remain powered o (in which case you must press the power switch to turn it back on), or
for it to automatically return to the power-on state. See the Advanced BIOS Setup section
for this setting. The default setting is Last State.
To Next Page
Loading...
Need help?
General
