Supermicro H11SSL-I/C/NC - Page 48

48
H11SSL Motherboard Series User's Manual
LAN Enable/Disable (JPL1, JPL2)
Jumper JPL1 and JPL2 will enable or disable the LAN1 or LAN2 ports, respectively on the
motherboard. See the table below for jumper settings. The default setting is enabled.
GLAN Enable
Jumper Settings
Pin# Denition
1-2 Enabled (default)
2-3 Disabled
SAS Enable/Disable (JPS1)
Jumper JPS1 will enable or disable the SAS ports on the motherboard. See the table below
for jumper settings. The default setting is enabled.
SAS Enable
Jumper Settings
Pin# Denition
1-2 Enabled (default)
2-3 Disabled