28
Chapter 2: Installation
Installing the Heatsink
1. After the processor is secured, now you must install the heatsink to the socket frame.
Lower the heatsink down until the four screws on the heatsink align with the four screw
holes on the socket frame.
2. Using a diagonal pattern, tighten the four screws down on the heatsink in the sequence
1-2-3-4 till it is secured. The heatsink will now be secured and you have nished
installing the processor and heatsink onto the motherboard. When nished, the heatsink
will be secured over the socket and processor.
To Next Page
Loading...
