Appendix A: Software
95
A.2 Driver Installation
The Supermicro website contains drivers and utilities for your system at https://www.
supermicro.com/wdl/. Some of these must be installed, such as the chipset driver.
After accessing the website, go into the CDR_Images (in the parent directory of the above
link) and locate the ISO le for your motherboard. Download this le to a USB ash or media
drive. (You may also use a utility to extract the ISO le if preferred.)
Another option is to go to the Supermicro website at http://www.supermicro.com/products/.
Find the product page for your motherboard, and "Download the Latest Drivers and Utilities".
Insert the ash drive or disk and the screenshot shown below should appear.
Figure A-3. Driver & Tool Installation Screen
Note: Click the icons showing a hand writing on paper to view the readme les for each
item. Click the computer icons to the right of these items to install each item (from top to the
bottom) one at a time. After installing each item, you must re-boot the system before
moving on to the next item on the list. The bottom icon with a CD on it allows you to view
the entire contents.
To Next Page
Loading...
