Supermicro H13SAE-MF - Installing Windows Operating System with Onboard M.2 RAID; Prerequisites

48
Chapter 2: Installation
2.10 Installing Windows Operating System with Onboard
M.2 RAID
Prerequisites
1. Go to https://rufus.ie/, download and use the RUFUS utility to create a USB bootable
drive with the Windows 10 or 11 ISO image supporting UEFI.
2. Download and unzip the AMD RAID driver in a USB thumb drive from https://www.
supermicro.com/wdl/driver/AMD/NVMe_RAID/Raid_PKG_S0i3_win_9.3.2_00158.zip
3. Install at least two NVMe drives in the sytem.
4. After the M.2 NVMe drives are installed, press the <Del> key to enter the BIOS menu,
go to Advanced and then PCIe/PCI/PnP, use the arrow keys to enable the NVMe RAID
Mode item, and press the <F4> key to save and exit the BIOS.
5. Press the <Del> key to enter the BIOS menu, go to Advanced, RaidXpert2 Conguration
Utility, Array Management, and then Create Array.
6. Change these items:
• Select RAID Level
• Select Physical Disks
• Select CacheTagSize
• Read Cache Policy
• Write Cache Policy