Supermicro H13SAE-MF - Memory Support and Installation; Memory Support

30
Chapter 2: Installation
DIMM Population Guide
Type
Channel
A1 A2 B1 B2
1 DIMM
V
2 DIMMs
V V
4 DIMMs
V V V V
Populating DDR5 Memory Modules with
AMD Ryzen 7000 Series Processor
Type
Number of DIMM
Sockets per Channel
Number
of DIMMs
Populated
Channel 0 Channel 1
SMT UDIMM 2
1
SR: 5200 MT/s
DR: 5200 MT/s
Not Valid
1 Not Valid
SR: 5200 MT/s
DR: 5200 MT/s
2
SR: 3600 MT/s
DR: 3600 MT/s
SR: 3600 MT/s
DR: 3600 MT/s
2.4 Memory Support and Installation
Note: Check the Supermicro website for recommended memory modules.
Important: Exercise extreme care when installing or removing DIMM modules to prevent
any possible damage.
Memory Support
The H13SAE-MF supports up to 128 GB of ECC/Non ECC UDIMM DDR5 5200 MT/s speed
memory, populated in four DIMM slots. Refer to the table below for additional memory
information.
Notes:
• Always use DDR5 DIMM modules of the same type, size and speed.
• DDR5 DIMM modules are NOT hot-swappable.
• Before inserting or removing the DDR5 DIMM modules, it is important that you must dis-
connect power for at least 20 seconds.
• Please be aware that removing a DDR5 DIMM module at a slant angle may cause
damages. It is recommend that you lift the module straight up out of the slot.