EasyManua.ls Logo

Supermicro H13SAE-MF - Front Control Panel Pin Definitions

Supermicro H13SAE-MF
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
Chapter 2: Installation
Front Control Panel Pin Denitions
Power LED
The Power LED connection is located on pins 15 and 16 of JF1. Refer to the table below
for pin denitions.
Power LED
Pin Denitions (JF1)
Pin# Denition
15 PWR_LED+
16
PWR_LED-
Storage Drive LED
The Storage Drive LED connection is located on pins 13 and 14 of JF1. Attach a drive LED
cable here to display disk activity detected on the motherboard's built-in disk controllers. See
the table below for pin denitions.
Storage Drive LED
Pin Denitions (JF1)
Pin# Denition
13 Drive LED+/UID Switch+
14 Drive_LED-
UID LED
The UID LED is on pins 7 and 8 of JF1. Connect the front panel UID LED to this header to
indicate when the rear UID switch is turned on. Refer to the table below for pin denitions.
UID LED
Pin Denitions (JF1)
Pin# Denition
7 UID LED+
8 UID LED-
Power Fail LED
The Power Fail LED connection is located on pins 5 and 6 of JF1. Refer to the table below
for pin denitions.
Power Fail LED
Pin Denitions (JF1)
Pin# Denition
5 Power Fail LED+
6 Power Fail LED-

Table of Contents

Other manuals for Supermicro H13SAE-MF

Related product manuals