Supermicro H13SAE-MF - Page 64

64
Chapter 4: BIOS
Bootup NumLock State
Use this feature to select the keyboard <Numlock> state. The options are On and O󰀨.
Wait For "F1" If Error
Use this feature to force the system to wait until the <F1> key is pressed if an error occurs.
The options are Disabled and Enabled.
INT19 (Interrupt 19) Trap Response
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is
set to Immediate, the ROM BIOS of the host adaptors will "capture" Interrupt 19 at bootup
immediately and allow the drives that are attached to these host adaptors to function as
bootable disks. If this item is set to Postponed, the ROM BIOS of the host adaptors will not
capture Interrupt 19 immediately and allow the drives attached to these adaptors to function
as bootable devices at bootup. The options are Immediate and Postponed.
Re-try Boot
If this item is enabled, the BIOS will automatically reboot the system from a specied boot
device after its initial boot failure. The options are Disabled, Legacy Boot, and EFI Boot.
Power Conguration
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reset or generate NMI based on
jumper settings when it is expired for more than 5 minutes. The options are Disabled and
Enabled.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Stay-Off for
the system power to remain o󰀨 after a power loss. Select Power-On for the system
power to be turned on after a power loss. Select Last State to allow the system to
resume its last power state before a power loss. The options are Stay O󰀨, Power On,
and Last State.
Power Button Function
This feature controls how the system shuts down when the power button is pressed. Select
Instant O󰀨 to instantly power o󰀨 the system as soon as the user presses the power button.
Select 4 Seconds Override for the user to power o󰀨 the system after pressing and holding the
power button for 4 seconds or longer. The options are Instant O󰀨 and 4 Seconds Override.
DeepS5 Power Policy
This feature enables or disables S5 Deep sleep mode. The options are Disabled, and
Enabled.