Supermicro H13SAE-MF - Page 67

Chapter 4: BIOS
67
Super IO Conguration
Super IO Conguration
The following Super IO information will display:
• Super IO Chip AST2600
Serial Port 1 Conguration
Serial Port 1 Conguration
Serial Port 1
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Change Settings
This feature species the base I/O port address and the Interrupt Request address of a
serial port specied by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=3F8h; IRQ=4;), (IO=2F8h; IRQ=4;),
(IO=3E8h; IRQ=4;), and (IO=2E8h; IRQ=4;).
Serial Port 2 Conguration
Serial Port 2 Conguration
Serial Port 2
Select Enabled to enable the selected onboard serial port. The options are Disabled and
Enabled.
Change Settings
This feature species the base I/O port address and the Interrupt Request address of a
serial port specied by the user. Select Auto to allow the BIOS to automatically assign the
base I/O and IRQ address. The options are Auto, (IO=2F8h; IRQ=3;), (IO=3F8h; IRQ=3,
), (IO=3E8h; IRQ=3;), and (IO=2E8h; IRQ=3).
Serial Port 2 Attribute
The options are SOL and COM.