70
Chapter 4: BIOS
Flow Control
Use this feature to set the ow control for Console Redirection to prevent data loss caused
by buer overow. Send a "Stop" signal to stop sending data when the receiving buer
is full. Send a "Start" signal to start sending data when the receiving buer is empty. The
options are None and Hardware RTS/CTS.
VT-UTF8 Combo Key Support
The options include Disabled and Enabled.
Recorder Mode
Select Enabled to capture the data displayed on a terminal and send it as text messages
to a remote server. The options are Disabled and Enabled.
Resolution 100x31
Select Enabled for extended-terminal resolution support. The options include Disabled and
Enabled.
Putty KeyPad
This feature selects the settings for Function Keys and KeyPad used for Putty, which is
a terminal emulator designed for the Windows OS. The options include VT100, LINUX,
XTERMR6, SC0, ESCN and VT400.
Legacy Console Redirection
Legacy Console Redirection Settings
Legacy Serial Redirection Port
Select a COM port to display redirection of legacy OS and legacy OPROM messages. The
options are COM1 and SOL/COM2.
Resolution
On legacy OS, the number of rows and columns supported redirection. The options are 80x24
and 80x25.
Redirection After BIOS POST
When Bootloader is selected, then Legacy Console Redirection is disabled before booting to
legacy OS. When Always Enable is selected, then Legacy Console Redirection is enabled
for legacy OS. Default setting for this option is set to Always Enable. The options are Always
Enable and BootLoader.
Serial Port for Out-of-Band Management/Windows Emergency Management Services
(EMS)
To Next Page
Loading...
