Supermicro H13SSL-N - Page 44

44
H13SSL-N/NT User's Manual
Chassis Intrusion (JL1)
A Chassis Intrusion header is located at JL1 on the motherboard. Attach the appropriate cable
from the chassis to the header to inform you when the chassis has been opened.
Chassis Intrusion
Pin Denitions
Pin# Denition
1 Ground
2 Intrusion Input
IPMB System Management Bus Header (JIPMB1)
A System Management Bus header for IPMI 2.0 is located at JIPMB1. Connect the appropriate
cable here to use the IPMB I
2
C connection on your system.
IPMB Header
Pin Denitions
Pin# Denition
1 Data
2 Ground
3 Clock
4 No Connection
Disk-On-Module Power Connectors (JSD1 & JSD2)
The Disk-On-Module (DOM) power connectors at JSD1 and JSD2 provide 5V power to solid-
state DOM storage devices connected to one of the SATA ports. See the table below for pin
denitions.
DOM Power
Pin Denitions
Pin# Denition
1 5V
2 Ground
3 Ground