H13SSL-N/NT User's Manual
80
iSCSI Second Target Parameters
This setting enables connection and congure communication parameters for the second
iSCSI target.
Secondary Device
Thie setting inputs secondary device MAC address.
Blink LEDs
Blink LEDs for a duration up to 15 seconds. The default value is 0.
Link Status
Disconnected
Permanent MAC Address
Virtual MAC Address
Broadcom Gigabit Ethernet BCM5720-3C:EC:EF:CF:54:29
Firmware Image Menu
Bootcode
MBA
EFI
iSCSI Boot
NC-SI
CCM
To Next Page
Loading...
