Supermicro P4SPA Plus - Page 54

SUPER P4SPA+/P4SPE User's Manual
4-10
Use IR Pins
This item sets the usage of IR pins. The options are RxD2, TxD2 and IR-
Rx2Tx2.
Onboard Parallel Port
This setting allows the user to set the address and the corresponding IRQ for
the onboard parallel port. The options are Disabled, 378/IRQ7, 278/IRQ5 and
3BC/IRQ7.
Parallel Port Mode
This setting sets the mode for the onboard Parallel port. The options are SPP,
EPP, ECP ECP+EPP and Normal.
EPP Mode Select
This setting allows the user to select the EPP port type. The options are EPP 1.9
and EPP 1.7.
ECP Mode Use DMA
This setting allows the user to select the DMA channel for the ECP mode (port).
The options are 1 and 3.
Game Port Address
This setting allows the user to set the address for the Game Port. The options
are Disabled, 201 and 209.
Midi Port Address
This setting allows the user to set the address for the Midi Port. The options are
Disabled, 330, 300 and 290.
Midi Port IRQ
This setting allows the user to set the IRQ for the Midi Port. The options are 5,
and 10.
Watch Dog Timer Select
This setting allows you to set the Watch Dog Timer. You must also change the
setting of the Watch Dog jumper in order for this function to work well (-see jumper
settings in Chapter 2). The options are 10 Sec, 20 Sec, 30 Sec, 40 Sec, 1 Min,
2 Min, 4 Min and Disabled.