Supermicro SC946ED-R2KJBOD - Installing the CMA Connector #2 onto the Inner Member

4-17
Chapter 4 Chassis Setup and Maintenance
Figure 4-18. Installing the CMA #2 Connector onto the Inner Member
CMA Connector #2 Apart
CMA Connector Apart
CMA Connector #2 Assembled
CMA Connector Assembled
1
D
1
F
1
C
1
E
2. Install CMA connector #2 (C) onto CMA connector #2 base (D) on the inner
member.
3. Install the CMA connector beside the center CMA body (E) onto the outer
member CMA connector base (F).
Figure 4-17. Installing the CMA Connector #1 onto the Inner Member