Supermicro SC946ED-R2KJBOD - 4-11 Assembling the Cable Management Arm

4-15
Chapter 4 Chassis Setup and Maintenance
Figure 4-16. Identifying the Cable Managment Arm Components
1
A
1
B
1
D
4-11 Assembling the Cable Management Arm
The SC946ED chassis supports a cable management arm (CMA) which helps to
keep the chassis cables organized and clear of the rach and rail mechanisms. The
swing arm functionality of the cable management arm keeps the cables clear while
maintenance is being performed on the system.
Preparing to Assemble the Cable Management Arm
Identify the components of the cable management arm as shown below:
1
C
1
E
1
F
Cable Arm Managment Components
A CMA connector #1
B CMA connector #1 base on the inner member
C CMA connector #2
D CMA connector #2 base on the outer member
E Center CMA body
F Outer member CMA connector base