5-5
Chapter 5: Rack Installation
Rail Assembly
(Shown with Rails
Retracted)
Locking Inner
Rail Tab
Push to Retract
Middle Rail
Outer Rail
Middle Rail
Inner Rail
Figure 5-2. Extending and Releasing the Inner Rail
1
2
1
3
1
4
Locking Tabs
Each inner rail has a locking tab. This tab locks the chassis into place when installed
and pushed fully into the rack. These tabs also lock the chassis in place when fully
extended from the rack. This prevents the server from coming completely out of
the rack when when the chassis is pulled out for servicing.
Releasing the Inner Rail
Releasing Inner Rail from the Outer Rails
1. Identify the left and right outer rail assemblies as described on page 5-4.
2. Pull the inner rail out of the outer rail until it is fully extended as illustrated
below.
3. Press the inner release tab to release the inner rail.
4. Pull the inner rail all the way out.
5. Repeat steps 1-3 for the second outer rail.
To Next Page
Loading...
