SC946ED Chassis Manual
4-18
Swing Arm Functionality of the Cable Arm
Swing Arm Function (Swings Right)
1. Press the button on CMA connector #1 (A).
2. Pull back on CMA connector #1 to release it from the base.
Figure 4-19. Swinging open the Cable Management Arm
Figure 4-20. Swinging open the Cable Management Arm
Swing Arm Function (Swings Left)
1. Press the release button on the CMA right inner arm (A) and separate the
inner arm from its connector.
1. Press the release button on the CMA right outer arm (B) and separate the
outer arm from its connector.
2. Swing the arm ninety degrees to the left.
To Next Page
Loading...
