Chapter 2: Server Installation
2-5
Figure 2-2. Installing the Inner Rail Extensions
Installing the Optional Inner Rail Extensions
Attaching the optional inner rail extensions allows you to pull the server farther out
of the rack. Do not put downward force on the chassis when it is fully extended.
Installing the Inner Rail Extensions
1. Place the inner rail extensions at the side of the chassis. Align the holes of the
inner rail extension with the hooks on the side of the chassis. Make sure the
extension faces outward like the inner rail.
2. Slide the extension toward the front of the chassis and under the hooks until the
quick release bracket snaps into place, securing the extension to the chassis.
3. If desired, you can install a screw to further secure the extention to the chassis.
4. Repeat for the other inner rail extension.
To Next Page
Loading...
