Supermicro SuperServer 1028GR-TR - Chapter 1 Introduction; Overview

Chapter 1
Introduction
1-1 Overview
The SuperServer 1028GR-TR(T) series is a high-end GPU server comprised of two
main subsystems: an SC118GH-R1K66B 1U server chassis and the X10DRG-H/HT
dual processor serverboard. The 1028GR-TR offers 1Gb LAN connections and
the 1028GR-TRT offers 10Gb. Refer to our web site for information on operating
www.supermicro.com).
Additional components are:
• Ten 4-cm counter-rotating fans (FAN-0141L4)
• One air shroud (MCP-310-11803-0N)
• Two passive CPU heatsinks (SNK-P0047PS:CPU1 and SNK-
P0047PSC:CPU2)
• Riser Cards
• One RSC-R1UG-A2E16-X9
• One RSC-R1UG-E16R-X9
• One RSC-R1UG-E16AR+II
• One RSC-R1UG-E16R+II
• Three power cables for GPU cards (CBL-PWEX-0582)
• SATA Accessories
One SAS backplane (BPN-SAS-118G-4)
Four hot-swap drive carriers (MCP-220-00047-0B)
Four SATA cables (CBL-0484L)
One SGPIO cable (CBL-0157L-02)
One backplane power ext. (CBL-0460L)
Five fan extension cables (CBL-0296L)
• One rail set (MCP-290-00054-0N)
Note: For your system to work properly, please follow the links below to download
all necessary drivers/utilities and the user’s manual for your server.
• Product manuals: http://www.supermicro.com/support/manuals/
• Product drivers and utilities: ftp://ftp.supermicro.com
• Product safety information:
http://www.supermicro.com/about/policies/safety_information.cfm
For support, email support@supermicro.com.
Chapter 1: Introduction
1-1