5-18
SUPERSERVER 1028GR-TR/TRT User's Manual
Universal Serial Bus (USB)
Two USB 3.0 ports (USB 4/5) are located
on the I/O rear I/O shield. In addition,
two internal USB headers, provide four
USB 3.0 connections (USB 0/1, USB 2/3)
for front panel support. (Cables are not
included). See the tables on the right for
Front Panel USB 0/1, 2/3
Pin Denition
1 +5V 2 +5V
3 USB_PN2 4 USB_PN3
5 USB_PP2 6 USB_PP3
7 Ground 8 Ground
9 Key 10 Ground
Ethernet Ports
Two Ethernet ports (LAN1, LAN2) are located on the rear I/O shield. These
Ethernet ports support 10G LAN connections on the X10DRG-HT, and Gigabit LAN
connections on the X10DRG-H. In addition, an IPMI_Dedicated LAN that supports
Gigabit LAN is located above USB 4/5 ports on the rear I/O shield. All Ethernet
ports accept RJ45 type cables.
To Next Page
Loading...
