Supermicro SuperServer 1029P-WTR - Control Panel; Server Chassis Features

10
SuperServer 1029P-WTR User's Manual
Control Panel Features
Item Feature Description
1 Power LED Main power button to apply or remove power from the system.
2 HDD LED 
3 LAN1/LAN2 LEDs 
4 Information LED See table below.
5 Power Button Main power button to apply or remove power from the system.
6 Reset Button Used to reboot the system.
7 UID Button


8 USB Ports USB 3.0 Ports
Figure 1-1. Control Panel View
1.4 Server Chassis Features
Control Panel
The switches and LEDs located on the control panel are described below. See Chapter 4 for
details on the control panel connections.
1
8
7
6
5
4 3 3 2
Information LED
Status Description
Continuously on and red
An overheat condition has occured.
(This may be caused by cable congestion.)
Blinking red (1Hz) Fan failure, check for an inoperative fan.
Solid blue
Local UID has been activated. Use this function to
locate the server in a rackmount environment.
Blinking blue
Remote UID is on. Use this function to identify the
server from a remote location.