Supermicro SuperServer 1029P-WTR - Installing the System into a Rack

SuperServer 1029P-WTR User's Manual
21
Installing the System into a Rack
1. 
2. Align the chassis with the front of the rack rails.
3. Slide the chassis rails into the rack rails, keeping the pressure even on both sides
(you may have to depress the locking tabs when inserting). When the server has been
pushed completely into the rack, you should hear the locking tabs "click".
4. (Optional) Insert and tightening the thumbscrews that hold the front of the server to the
rack.
Warning: Stability hazard. The rack stabilizing mechanism must be in place, or the

stabilize the rack can cause the rack to tip over.
Slide rail mounted equipment is not to be used as a shelf or a work space.