Chapter 7: AMI BIOS
7-27
TPM State
This feature changes the TPM State. The options are Disabled and Enabled.
Note: The system will restart to change the TPM State.
Pending operation
Use this item to schedule a TPM-related operation to be performed by a security
device for system data integrity. Your system will reboot to carry out a pending TPM
operation. The options are None and TPM Clear.
Device Select
Use this feature to select the TPM version. TPM 1.2 will restrict support to TPM 1.2
devices. TPM 2.0 will restrict support for TPM 2.0 devices. Select Auto to enable
support for both versions. The default setting is Auto.
The following are informational status messages that indicate the current TPM State:
TPM Enabled Status
TPM Active Status
TPM Owner Status
TXT Support
Intel TXT (Trusted Execution Technology) helps protect against software-based at-
tacks and ensures protection, condentiality and integrity of data stored or created
on the system. Use this feature to enable or disable TXT Support. The options are
Disabled and Enabled.
To Next Page
Loading...
