Supermicro SUPERSERVER 5018D-FN8T - Chipset Configuration; North Bridge; Iio Configuration

Chapter 7: AMI BIOS
7-11
SAPM Control
This feature indicates whether the PCU should control the System Agent
PM using its power-performance tuning algorithm. The options are Enable
and Disable.
Energy Efcient Turbo
Use this feature to enable energy efcient turbo mode. The options are En-
able and Disable.
DRAM RAPL Conguration
Override BW_LIMIT_TF
This feature allows the user to turn off the "Override BW_LIMIT_TF (Time
Frame)" setting when the item "Running Average Limit for DRAM modules"
(DRAM RAPL) is set to Enabled so that the DRAM RAPL setting can work
properly. The default setting is 1.
DRAM RAPL Extended Range
Use this feature to set the DRAM Running Average Power Limit (RAPL)
Extended Range. The options are Disable and Enable.
Chipset Conguration
Warning: Setting the wrong values in the following features may cause the system
to malfunction.
North Bridge
This feature allows the user to congure the following North Bridge settings.
IIO Conguration
EV DFX (Device Function On-Hide) Features
When this feature is set to Enable, the EV_DFX Lock Bits that are located on a
processor will always remain clear during electric tuning. The options are Dis-
able and Enable.