Supermicro SUPERSERVER 5018D-FN8T - 5-9 Onboard Indicators

5-20
SUPERSERVER 5018D-FN8T User's Manual
5-9 Onboard Indicators
LAN LEDs
Each Ethernet port has two LED indicators.
One shows activity when ashing. The
other LED indicates the speed of the
connection. See the table on the right for
a description.
Link Speed LED States
Color Denition
Off No Connection or 10 Mbps
Amber 1 Gbps
Green For LAN 1-6: 100 Mbps
Link Speed LED
Activity LED
BMC Heartbeat
LED States
Color/State Denition
Green: Blinking BMC: Normal
BMC Heartbeat LED
A BMC Heartbeat LED is located at
LEDM1. See the table on the right for a
description.
Onboard Power LED
An Onboard Power LED is located at
LED3 on the motherboard. When this LED
is on, the system is on. See the table on
the right for a description.
Onboard PWR LED Indicator
LED States
Color Denition
Off System Off (PWR cable
not connected)
Green System On
LEDT1
LEDT3
LEDT2
LEDT4
10G LAN Activity LED
The Activity LED for LAN7 is located at
LEDT2, and the Activity LED for LAN8 is
located at LEDT4. The LEDs blink when
the LAN is active.
10G LAN Link Status LED
The Link status LED for LAN7 is located at
LEDT1, and the Link status LED for LAN8
is located at LEDT3. When the LEDs are
on, the LAN is working properly.