Supermicro SUPERSERVER 5018D-FN8T - 6-2 Removing Power from the System

SUPERSERVER 5018D-FN8T User's Manual
6-2
6-2 Removing Power from the System
Before performing most setup or maintenance tasks, use the following procedure
to ensure that power has been removed from the system.
1. Use the operating system to power down the system, following the on-screen
prompts.
2. After the system has completely shut-down, carefully grasp the head of the
power cord and gently pull it out of the back of the power supply.
3. Disconnect the cord from the power strip or wall outlet.