Chapter 6: BIOSSuperServer 5019P-WT/WTR User's Manual
105104
6.8 Save & Exit
Use this feature to save, discard, and reset setting changes.
Save Options
Discard Changes and Exit
Select this option to quit the BIOS Setup without making any permanent changes to the
Save & Exit menu and press <Enter>.
Save Changes and Reset
you have made. This will not reset (reboot) the system. \
Save Changes
take effect. Select Save Changes from the Save & Exit menu and press <Enter>.
Discard Changes
Select this option and press <Enter> to discard all the changes and return to the AMI BIOS
utility program.
Default Options
Restore Optimized Defaults
To set this feature, select Restore Defaults from the Save & Exit menu and press <Enter>.
These are factory settings designed for maximum system stability, but not for maximum
performance.
Save As User Defaults
To set this feature, select Save as User Defaults from the Save & Exit menu and press
<Enter>. This enables the user to save any changes to the BIOS setup for future use.
Restore User Defaults
To set this feature, select Restore User Defaults from the Save & Exit menu and press <Enter>.
Boot Override
Listed in this section are other boot options for the system (i.e., Built-in EFI shell). Select an
option and press <Enter>. Your system will boot to the selected boot option.
To Next Page
Loading...
