Supermicro SuperServer 6048R-TXR - Installing the Inner Rails

2-6
SUPERSERVER 6048R-TXR User's Manual
Figure 2-3. Installing the Inner Rails
Installing the Inner Rails
Installing the Inner Rails
1. Place the inner rails on the side of the chassis aligning the hooks of the chas-
sis with the rail holes. Make sure the rail faces "outward".
2. Slide the inner rail toward the front of the chassis.
3. Secure the chassis with two screws as illustrated. Repeat steps 1 and 2 for
the other inner rail.
1
1
1
2
1
3
1
3
Warning: In any instance of pulling the system from the rack, always use
a rack lift and follow all associated safety precautions.
Warning: When initially installing the server to a rack, test that the rail
locking tabs engage to prevent the server from being overextended. Have
a rack lift in place as a precaution in case the test fails.