Supermicro SuperServer 6048R-TXR - Page 60

5-14
SUPERSERVER 6048R-TXR User's Manual
Connector Description
COM1/COM2 Backplane Serial Port1/Serial Header 2
Fan1-7, A-D CPU/System Fan Headers (FAN6: CPU1 fan, FAN7: CPU2 fan)
JF1 Front Panel Control Header
JL1 Chassis Intrusion Header
JIPMB1 4-pin External BMC I
2
C Header (for IPMI card)
JSD1/JSD2 SATA DOM (Device on Module) Connections
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
JUIDB1 UID (Unit Identication) Button
JNVI2C1/2 VPP header for NVMe AOC
IPMI LAN Dedicated IPMI LAN (supported by the Aspeed controller)
JSTBY1 Standby Power Connector
LAN1/LAN2 Gigabit LAN Ethernet Ports 1/2
JPI
2
C1 Power Supply SMBus I
2
C Header
JPWR1 24-pin ATX Main Power Connector
JPWR2/3 12V 8-pin Power Connectors
JPWR4 12V 4-pin Power Connector
I-SATA0-5
SATA 3.0 Ports (supported by Intel PCH, I-SATA4/I-SATA5 support
SuperDOMs with power-pins built-in)
S-SATA 0~3 SATA 3.0 Ports (supported by Intel SCU)
I-SGPIO1/2 Serial Link General Purpose I/O Headers (for I-SATA0-3, I-SATA4/5)
S-SGPIO1 Serial Link General Purpose I/O Header (for S-SATA0-3)
SP1 Internal Speaker/Buzzer
JUIDB1 Unit Identication (UID) Switch
USB 0/1 Backpanel USB Ports 0/1 (USB 2.0)
USB 2/3 Front-accessible USB 2/3 Headers (USB 2.0)
USB 4/5 Backpanel USB 4/5 Ports (USB 3.0)
USB 6 Front-accessible Type A USB 6 Port (USB 3.0)
USB 7/8 (3.0) Front-accessible USB 7/8 Headers (USB 3.0)
LED Description Status
LED1 Rear UID LED (Blue: On) Unit Identied
LED2 Onboard PWR LED On System Power On
LEM1 BMC Heartbeat LED (Green: Blinking) BMC Normal