Supermicro SuperServer SYS-221GE-NR - Installing the Rails; Identifying the Rails

24
Chapter 2: Server Installation
2.3 Installing the Rails
󰀨
procedure. 
The following is a basic guideline for installing the system into a rack with the rack mounting
hardware provided. You should also refer to the installation instructions that came with the

Identifying the Rails
The chassis package includes two rail assemblies. Each assembly consists of three sections:
An inner rail that secures directly to the chassis, an outer rail that secures to the rack, and

for the left and right side of the chassis and labeled as such.
Figure 2-1. Identifying the Outer Rail, Middle Rail and Inner Rail
(Left Rail Assembly Shown)
Inner Rail
Locking Tab
Middle Rail
Outer Rail