Supermicro SuperServer SYS-221GE-NR - Installing the Inner Rails on the Chassis

26
Chapter 2: Server Installation
Figure 2-3. Installing the Inner Rails
Installing the Inner Rails on the Chassis
Installing the Inner Rails
1. Identify the left and right inner rails. They are labeled.
2. 
of the chassis with the holes in the inner rail.
3. Slide the inner rail toward the rear of the chassis until the quick release bracket snaps
into place, securing the rail to the chassis.
4. Optionally, you can further secure the inner rail to the chassis with screws.
Inner Rails
3
2