1-10
X10DRG-O(T)+-CPU/X10DRG-O-PCIE User’s Manual
Serial (COM) Port
• One (1) Fast UART 16550 connections (COM1: for
backpanel support)
Peripheral
Devices
USB Devices
• Four (4) USB 3.0 ports on the rear I/O panel (USB
5/6, USB 7/8)
• Two (2) USB 2.0 header for four USB 2.0 front-
accessible connections (USB 0/1, 2/3)
• One (1) USB 2.0 Type A header front-access (USB 4)
BIOS
• 16 MB SPI AMI BIOS
®
SM Flash UEFI BIOS
• ACPI 3.0/4.0, PCI F/W 3.0, BIOS rescue hot-key,
riser card detection, Plug & Play (PnP) and SMBIOS
2.7 or later
Power
• ACPI power management
Management
• Main switch override mechanism
• Power-on mode for AC power recovery
• Intel® Intelligent Power Node Manager 3.0 (Available
when the SPM utility is installed and special power
supply is used.)
• Management Engine (ME)
System
Health
Monitoring
System Health/CPU Monitoring
• Onboard voltage monitoring for +3.3V, 3.3V standby,
+5V, +5V standby, +12V, chipset, BMC, memory, bat-
tery, and CPU core voltages
• Temperature monitoring for system/memory/PCH/
CPU temperatures
• CPU 5-phase switching voltage regulator
• CPU/system overheat LED and control
• CPU thermal trip support
• Status monitor for speed control
• Status monitor for On/Off control
• CPU Thermal Design Power (TDP) support of up to
160W (See Note 1 on the next page.)
Fan Control
• Fan status monitoring via IPMI connections
• Dual cooling zone
• Multi-fan speed control via BMC
• Pulse Width Modulation (PWM) fan control
To Next Page
Loading...
