Supermicro X10DRG-O+-CPU - Onboard LED Indicators; LAN Leds; 2. IPMI LAN Leds

Chapter 2: Installation
2-35
2-9 Onboard LED Indicators
1. LAN1/2 LEDs
2. IPMI LAN LEDs
10G SAN MAC
BIOS LICENSE
+
1
1
+
DESIGNED IN USA
1G/10G MAC CODE
X10DRG-O+-CPU
REV:
1.00
IPMI CODE
BAR CODE
LD1
CLOSE 1st
OPEN 1st
CPU1
PCH
BMC
LAN
CTRL
LD2
JBT1
SW1
JITP1
J34
J33
JSPK1
JL1
JPB1
JPME2
JPL1
JVRM1
JPG1
JVRM2
J1
JPW22
JPW21 JPW24JPW23
JPW17JPW18
JPW14
JPW16
JPW15
JPW13
JPW3
JPW5
JPW7
JPW6
JPW12
JPW4
LE1
LE2
LEDM1
I-SGPIO1
I-SGPIO2
S-SGPIO
JTPM1
JF1
FAN4
FAN8
FAN3 FAN7
FAN2 FAN6
FAN5 FAN1
JSD2
JSD1
S-SATA3
S-SATA2 S-SATA1
S-SATA0
I-SATA5
I-SATA4
I-SATA3
I-SATA1
I-SATA2
I-SATA0
BT1
JPW10
JPP1
JPP2
J32
J31
CLOSE 1st
OPEN 1st
CPU2
USB7/8(3.0)
USB5/6(3.0)
USB4
P2 DIMMH3 P2 DIMMG3
P2 DIMME3
P2 DIMMF3
P1 DIMMC3
P1 DIMMD3
P1 DIMMA3
P1 DIMMB3
USB0/1
USB2/3
JWD1
JBR1
ON
RST
JF1
PWR
FAIL LED
PS
UID
2
NIC
1LED
HDDNIC
LED
PWR
X
NMI
P1 DIMMC1
P2 DIMME1
COM1
P1 DIMMC2
P1 DIMMD1
P2 DIMME2
P1 DIMMD2
P2 DIMMF1 P2 DIMMF2
P1 DIMMB2
P2 DIMMH2
P1 DIMMB1 P1 DIMMA2
P2 DIMMH1
P1 DIMMA1
P2 DIMMG2 P2 DIMMG1
VGA
IPMI_LAN
LAN2
LAN1
1
2
IPMI_LAN LEDs
In addition to LAN1/LAN2, an IPMI_LAN
is also located above USB 5/6 on the I/O
back panel. The amber LED on the right
indicates activity, while the green LED on
the left indicates the speed of the con-
nection. See the tables at right for more
information.
Link LED Activity LED
IPMI LAN
IPMI LAN Link LED (Left) &
Activity LED (Right)
Color/State Defi nition
Link (Left) Green: Solid
Amber: Solid
100 Mbps
1 Gbps
Activity (Right) Amber: Blinking Active
LAN LEDs
The LAN ports are located on the IO back
panel on the motherboard. Each Ethernet
LAN port has two LEDs. The yellow LED
indicates activity. The Link LED on the
left side of the LAN port may be green,
amber, or off to indicate the speed of the
connection. See the tables at right for
more information.
Activity LED
LAN Link LED Set-
tings
(For X10DRG-OT+)
Color Defi nition
Off No Connec-
tion,
10 or 100
Mbps
Green 10 Gbps
Amber 1 Gbps
Link LED
GLAN Activity Indicator (Left)
LED Settings
Color Status Defi nition
Yellow Flashing Active
Rear View (when facing the
rear side of the chassis)
LAN Link LED
Settings
(For X10DRG-O+)
Color Defi nition
Off No Con-
nection,
10 Mbps
Green 100 Mbps
Amber 1 Gbps