Supermicro X10SDV-TLN4F - Fan Headers (FAN1 ~ FAN3); Chassis Intrusion

2-20
X10SDV-TLN4F/F Motherboard User’s Manual
LAN3/4
LAN1/2
PCI-E3.0 X16
:TPM/PORT80
USB 2/3
USB 0/1(3.0)
USB 4/5
SLOT7
JBT1
IPMI_LAN
JGPIO1
DESIGNED IN USA
1
X10SDV-TLN4F
REV:1.01
LED3
J6
BMC
AST2400
i350
CPU
JUIDB1
I-SGPIO2
I-SGPIO1
JF1
JL1
JOH1
JD1
PJ1
JSTBY1
JPW1
LED8
LED7
LEDM1
BT1
FAN3
FAN2
FAN1
COM1
VGA1
JTPM1
JSD1
JPUSB1
JPME1
JPG1
JPB1
JI2C1
JI2C2
JSMB1
JPL1
JBR1
JPME2
I-SATA3
I-SATA1
I-SATA2
I-SATA5
I-SATA4
DIMMB2 DIMMA2
DIMMB1
DIMMA1
I-SATA0
JIPMB1
JNVI2C1
SRW2
SRW1
JWD1 JPTG1
J21
Fan Header
Pin Denitions
Pin# Denition
1 Ground (Black)
2 12V (Red)
3 Tachometer
4 PWM_Control
Fan Headers (FAN1 ~ FAN3)
This motherboard has three fan headers. These
fans are 4-pin headers. Although pins 1-3 of the
fan headers are backward compatible with the
traditional 3-pin fans, we recommend you use
4-pin fans to take advantage of the fan speed
control via Pulse Width Modulation through the
BMC. This allows the fan speeds to be auto-
matically adjusted based on the motherboard
temperature. Refer to the table on the right for
pin denitions.
A
B
A. Fan 1
B. Fan 2
C. Fan 3
D. Chassis Intrusion
C
D
Chassis Intrusion
A Chassis Intrusion header is located at JL1 on
the motherboard. Attach the appropriate cable
from the chassis to inform you of a chassis intru-
sion when the chassis is opened.
Chassis Intrusion
Pin Denitions (JL1)
Pin# Denition
1 Ground
2 Intrusion Input