Supermicro X10SDV-TLN4F - Motherboard Jumper Settings

2-26
X10SDV-TLN4F/F Motherboard User’s Manual
LAN3/4
LAN1/2
PCI-E3.0 X16
:TPM/PORT80
USB 2/3
USB 0/1(3.0)
USB 4/5
SLOT7
JBT1
IPMI_LAN
JGPIO1
DESIGNED IN USA
1
X10SDV-TLN4F
REV:1.01
LED3
J6
BMC
AST2400
i350
CPU
JUIDB1
I-SGPIO2
I-SGPIO1
JF1
JL1
JOH1
JD1
PJ1
JSTBY1
JPW1
LED8
LED7
LEDM1
BT1
FAN3
FAN2
FAN1
COM1
VGA1
JTPM1
JSD1
JPUSB1
JPME1
JPG1
JPB1
JI2C1
JI2C2
JSMB1
JPL1
JBR1
JPME2
I-SATA3
I-SATA1
I-SATA2
I-SATA5
I-SATA4
DIMMB2 DIMMA2
DIMMB1
DIMMA1
I-SATA0
JIPMB1
JNVI2C1
SRW2
SRW1
JWD1 JPTG1
J21
2-7 Jumper Settings
Explanation of Jumpers
To modify the operation of the mother-
board, jumpers can be used to choose
between optional settings. Jumpers create
shorts between two pins to change the
function of the connector. Pin 1 is identied
with a square solder pad on the printed
circuit board.
Note: On two-pin jumpers,
"Closed" means the jumper is on,
and "Open" means the jumper is
off the pins.
A. VGA Enable
A
VGA Enable
Jumper JPG1 allows the user to enable the
onboard VGA connector. The default setting
is pins 1-2 to enable the connection. See the
table on the right for jumper settings.
VGA Enable
Jumper Settings
Pin# Denition
1-2 Enabled (Default)
2-3 Disabled