Supermicro X10SDV - Onboard LED Indicators Overview

Chapter 1: Introduction
1-11
JOH1 Overheat LED Header
JPH1 4-pin Power Connector for HDD use (To provide power
from the motherboard to onboard HDD devices.)
JPI
2
C1 Power Supply SMBus I
2
C Header
JPV1 12V 8-pin DC Power Connector (To provide alternative
power for special enclosure when the 24-pin ATX power is
not in use.)
JPW1 24-pin ATX Power Connector
JSD1, JSD2 SATA DOM (Device On Module) Power Connectors
JSMB1 SMBus Header
JSTBY1 5V Standby Power Header
JTGLED1 LAN7 ~ LAN8 Activity LED Header
JTPM1 Trusted Platform Module (TPM)/Port 80 Connector
LAN1 ~ LAN8 Gigabit Ethernet (RJ45) Ports (LAN1 ~ LAN6)
(LAN3 ~ LAN6 on 7TP8F/TP8F only)
10Gigabit Ethernet (SFP+) Ports (LAN7 ~ LAN8)
L-SAS0 ~ L-SAS15 SAS 2.0/SATA 3.0 Ports (7TP8F/7TP4F only)
M2-SRW1 ~ SRW3 M.2 Mounting Screws
MP-SRW1 ~ SRW2 PCI-E 2.0 X1 / I-SATA5 Slot Mounting Screws
SLOT6, SLOT7 CPU PCI-E 3.0 X8 Slot
UID Unit ID Button
USB 0/1 Back panel USB 3.0 Ports
USB 2 USB Type-A Connector
USB 3/4, 5/6 Front Access USB 2.0 Ports
VGA Back panel VGA Port
LED Indicators
LED Description Color/State Status
LED3 Power LED Green: On System Power On
LED7 UID Switch LED Blue: On Unit Identied
LED8 Overheat/PWR Fail/Fan Fail
LED
Red: Solid on
Blinking
Overheat
PWR Fail or Fan Fail
LEDM1 BMC Heartbeat LED Green: Blinking BMC: Normal
LEDS1 SAS Heartbeat LED
(7TP8F/7TP4F only)
Green: Blinking
Red
SAS Active
SAS Error
LEDT1 LAN7 Link Status Green: On LAN7 Normal
LEDT2 LAN7 Activity Green: Blinking LAN7 Active
LEDT3 LAN8 Link Status Green: On LAN8 Normal
LEDT4 LAN8 Activity Green: Blinking LAN8 Active