1-12
X10SDV Flex ATX Series Motherboard User’s Manual
Motherboard Features
CPU Intel Xeon/Pentium D-1500 Family Processor (BGA)
Memory Supports up to 128GB DDR4 ECC RDIMM or 64GB
DDR4 ECC/Non-ECC UDIMM with a max data rate of
2133MHz in four (4) slots
DIMM sizes
DIMMs 4GB, 8GB, 16GB and 32GB (32GB
for RDIMM only, Dual Rank Data
width x4)
Expansion Slot One (1) M.2 PCIe 3.0 x4 Slot, M Key for 2242/2280/22110
SSD, SATA 3.0 support (Mux with I-SATA4)
One (1) Mini PCI-E 2.0 X1 slot with mSATA support (Mux
with I-SATA5)
Network Connections Network Controllers
Intel SoC integrated 10GbE Controller
Intel
®
I350 AM4 10GbE Controller (7TP8F/TP8F only)
Intel
®
I210 1GbE Controller
LAN Ports
Up to Six (6) RJ-45 and two (2) SFP+ ports on the rear
IO panel with Link and Activity LEDs
IPMI LAN Port
Supported by Aspeed AST2400 BMC
IO Devices SATA/SAS Connections
SATA 3.0 (6GB/s) Four (4) SATA 3.0 ports, one (1)
via M.2, one (1) via Mini-PCIE
mSATA
SAS 2.0/SATA 3.0 Sixteen (16) ports via four 4) Mini-
SAS HD cables (7TP8F/7TP4F
only)
USB Devices
Four (4) USB 2.0 via header
Two (2) USB 3.0 via rear IO panel connector
One (1) USB Type-A
Serial (COM) Port
One (1) header
IPMI 2.0
IPMI 2.0 supported by Aspeed AST2400 BMC (Base-
board Management Controller)
VGA (Graphics Display)
One (1) VGA Port on the rear IO panel supported by the
Aspeed AST2400 VGA Controller
To Next Page
Loading...
