EasyManua.ls Logo

Supermicro X10SDV - Management Engine and PCI;PnP Settings

Supermicro X10SDV
123 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4: AMI BIOS
4-17
*If the item "Congure SATA as" is set to IDE, the following items will
display:
SATA Frozen
Use this item to enable the HDD Security Frozen Mode. The options are Dis-
abled and Enabled.
Port 0 ~ Port 5 SATA Device Type (Available when a SATA port is
detected)
Use this item to specify if the SATA port specied by the user should be con-
nected to a Solid State drive or a Hard Disk Drive. The options are Hard Disk
Drive and Solid State Drive.
Server ME (Management Engine) Conguration
This feature displays the following system ME conguration settings.
General ME Conguration
Operational Firmware Version
ME Firmware Type
Recovery Firmware Version
ME Firmware Features
ME Firmware Status #1
ME Firmware Status #2
Current State
Error Code
PCIe/PCI/PnP Conguration
The following information will display:
PCI Bus Driver Version
PCI Devices Common Settings:

Table of Contents

Related product manuals