53
Chapter 2: Installation
COM1
JBT1
B3
USB0/1 (2.0)
JPAC1
JPME2
JF1
JLED1
CPU SLOT6 PCI-E 3.0 X16
PCH SLOT2 PCI-E 3.0 X4
PCH SLOT7 PCI-E 3.0 X1
SLOT1 PCI 33MHZ
JWD1
JTBT1
CPU
PCI-E_M.2-M2
PCI-E_M.2-M1
I-SATA5
I-SATA3
I-SATA1
CMOS CLEAR
I-SATA4
I-SATA2
I-SATA0
I-SATA7
I-SATA6
U.2-1
USB4/5 (3.0)
USB8 (3.1,TypeC)
USB9 (3.1,TypeA)
SYS_FAN2
JPW1
SYS_FAN1
CPU_FAN1
JVR1
DIMMA1
DIMMA2
DIMMB1
DIMMB2
CPU_FAN2
SYS_FAN3
JPW2
JPL1
DVI
DP
HDMI
USB2/3(3.0)
USB6/7(3.1)
LAN1
LAN2
AUDIO
JPL2
I-SGPIO1
I-SGPIO2
JSTBY1
SPKR
SP1
JTPM1
AUDIO_FP
JPI2C1
CPU SLOT4 PCI-E 3.0 X8 (IN X16)
JL1
JSD1
LED_PWR_SB
SATA Ports
Eight SATA 3.0 connectors, supported by the Intel C246 PCH chip, are located on the
X11SCA/-W/-F motherboard. These SATA ports support RAID 0, 1, 5, and 10. SATA ports
provide serial-link signal connections, which are faster than the connections of Parallel ATA.
See the tables below for pin denitions.
Note 1: For more information on the SATA HostRAID conguration, please refer to the
Intel SATA HostRAID user's guide posted on our website at http://www.supermicro.com.
1
2
1. I-SATA0
2. I-SATA1
3. I-SATA2
4. I-SATA3
5. I-SATA4
6. I-SATA5
7. I-SATA6
8. I-SATA7
5
6 4
3
SATA 3.0 Port
Pin Definitions
Pin# Signal
1 Ground
2 SATA_TXP
3 SATA_TXN
4 Ground
5 SATA_RXN
6 SATA_RXP
7 Ground
X11SCA/-W/-F SATA 3.0 Connector Types
Port# Connection Type
I-SATA 0-3
(Four)
SATA 3.0/6 Gb/s
RAID 0, 1, 5, 10
I-SATA 4-7
(Two)
SATA 3.0/6 Gb/s
RAID 0, 1, 5, 10
SuperDOM connectors
Supported by Intel C246 PCH
8
7
To Next Page
Loading...
