Supermicro X11SCA - Page 81

Chapter 4: BIOS
81
PCH SLOT2 PCI-E 3.0 X4/PCI-E M.2-M1
SLOT2/M.2-M1 ASPM Support
This feature controls the Active State Power Management (ASPM) setting. The options
are Disabled, L0s, L1, L0sL1, and Auto.
SLOT2/M.2-M1 L1 Substates
This feature controls L1 Substates. The options are Disabled, L1.1, and L1.1 & L1.2.
PTM
This feature enables Precision Time Measurement (PTM). The options are Disabled
or Enabled.
DPC
This feature enables Downstream Port Containment (DPC). The options are Disabled
or Enabled.
EDPC
This feature enables rootport Extension for Downstream Port Containment. The options
are Disabled or Enabled.
SLOT2/M.2-M1 PCIe Speed
This feature controls the PCIe Speed. The options are Auto, Gen1, Gen2, and Gen3.
Frontside Audio Mode
This feature controls the Frontside Audio mode. The options are HD Audio or AC'97.
PCIe PLL SSC
This feature controls the PCIe PLL SSC setting. The options are Auto and 0.0~2.0% (in
0.1% increments).
NCT6796D Super IO Conguration
Serial Port 1 Conguration
Serial Port 1
This feature will enable Serial Port 1 (COM1). Click to check the box to enable Serial Port
1. The default is Checked (Enabled).
Device Settings
Change Settings
This feature congures the IRQ setting for Serial Port 1 (COM1). The default is Auto.