Supermicro X11SCA - Page 92

X11SCA/-W/-F User Manual
92
PCI PERR/SERR Support
This feature enables PCI Parity Error (PERR)/System Error (SERR) support. The options are
Disabled or Enabled.
Above 4GB MMIO BIOS assignment
Select Enable for remapping of BIOS above 4GB. The options are Disabled or Enabled.
Onboard Video Option ROM (X11SCA-F only)
This feature controls which onboard video rmware type will be loaded. The options are
Disabled, Legacy, and EFI.
SLOT1 PCI 33MHZ OPROM
PCH SLOT2 PCI-E 3.0 X4 OPROM
CPU SLOT4 PCI-E 3.0 X8 (IN X16) OPROM
CPU SLOT6 PCI-E 3.0 X16 OPROM
PCH SLOT7 PCI-E 3.0 X1 OPROM
PCI-E M.2-M1 OPROM
PCI-E M.2-M2 OPROM
Select Disabled to deactivate the selected slot, Legacy to activate the slot in legacy mode
and EFI to activate the slot in EFI mode. The options are Disabled, Legacy, and EFI.
Onboard LAN1 SUPPORT
Use this feature to enable the onboard LAN1 device. The options are Disabled or Enabled.
Onboard LAN Option ROM Type
Use this feature to select the type of option ROM installed. The options are EFI or Legacy.
Onboard LAN1 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer using a PXE device
installed in a specied LAN port. Select Disabled to prevent system boot using a device
installed in a LAN port. The options are Disabled or PXE.
Onboard LAN2 Option ROM
Select PXE (Preboot Execution Environment) to boot the computer using a PXE device
installed in a specied LAN port. Select Disabled to prevent system boot using a device
installed in a LAN port. For X11SCA-F motherboards, the options are iSCSI or PXE. For all
others the only option is PXE.
Network Stack
Select Enabled to enable PXE (Preboot Execution Environment) or UEFI (Unied Extensible
Firmware Interface) for network stack support. The options are Disabled or Enabled.
*If this feature is enabled, the two features below are available.