Supermicro X11SCA - Page 93

Chapter 4: BIOS
93
Ipv4 PXE Support
Select Enabled to enable Ipv4 PXE (Preboot Execution Environment) for boot support. If
this feature is set to Disabled, Ipv4 PXE boot option will not be supported. The options are
Disabled or Enabled.
Ipv4 HTTP Support
Select Enabled to enable IPv4 HTTP boot support. The options are Disabled or Enabled.
Ipv6 PXE Support
Select Enabled to enable Ipv6 PXE (Preboot Execution Environment) for boot support. If
this feature is set to Disabled, Ipv6 PXE boot option will not be supported. The options are
Disabled or Enabled.
Ipv6 HTTP Support
Select Enabled to enable IPv6 HTTP boot support. The options are Disabled or Enabled.
IPSEC Certicate
This feature enables IPSEC certicate support for Ikev. The options are Disabled or Enabled.
PXE boot wait time
Enter a value for the wait time (in seconds) to press the ESC key to abort the PXE boot.
The default is 0.
Media detect count
Enter a value for the number of times the presence of media will be checked. The default is 1.
Trusted Computing
Security Device Support
This feature enables BIOS support for a security device. The options are Disabled or Enabled.
TPM State
This feature enables an installed security device. Changing the setting will reboot the
computer. The options are Disabled or Enabled.
Pending operation
This feature schedules an operation for an installed security device. Changing the setting will
reboot the computer. The options are None or TPM Clear.