Supermicro X12DPi-N6 - Page 98

Super X12DPi-N6/X12DPi-NT6 User's Manual
98
PMem Conguration
PMem QoS (Quality of Service) (Available when PMem Memory is installed
onboard)
Select PMem QoS Disabled to prevent DDR4 memory from dropping the performance
when PMem modules are detected in the system. The options are PMem QoS Disabled,
Prole 1 - Optimized for 8 PMem modules per socket, and Prole 2 - Optimized for 4/2/1
PMem modules per socket.
PMem Performance Setting (Available when PMem Memory is installed onboard)
This feature congures the baseline (default) performance setting for the onboard PMmem
memory, which largely depends on workload requirements. Select BW (Bandwidth)
Optimized to optimize PMem performance. The options are BW Optimized, and Balanced
Prole.
VMWare PMem Support (Available when PMem Memory is installed onboard)
Select Enabled to support VMware certication for onboard PMem memory. The options
are Disabled, and Enabled.
IIO Conguration
This submenu allows the user to congure the IIO settings for the PCIe devices detected
by the BIOS.
CPU1 Conguration/CPU2 Conguration
Note: The items displayed on the screen depend on the IIO PCIe devices installed on
the motherboard.
IOU0 (IIO PCIe Port 1)
Use this feature to congure the PCIe Bifurcation setting for a PCIe port specied by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOU1 (IIO PCIe Port 2)
Use this feature to congure the PCIe Bifurcation setting for a PCIe port specied by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOU3 (IIO PCIe Port 4)
Use this feature to congure the PCIe Bifurcation setting for a PCIe port specied by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.
IOU4 (IIO PCIe Port 5)
Use this feature to congure the PCIe Bifurcation setting for a PCIe port specied by the
user. The options are x4x4x4x4, x4x4x8, x8x4x4, x8x8, x16, and Auto.